Depending on the DVD or VIDEO CD,
some operations may be different or
Refer to the operating instructions supplied
with your disc.
Turn on your TV.
The player turns on and the power
indicator lights up in green.
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
When using an amplifier (receiver)
Turn on the amplifier (receiver) and
select the appropriate channel so that
you can hear sound from the player.
Press A on the player, and place
a disc on the disc tray.
With the playback side facing down
The disc tray closes, and the player
starts playback (continuous play). Adjust
the volume on the TV or the amplifier
Depending on the disc, a menu may
appear on the TV screen. For DVDs, see
page 33. For VIDEO CDs, see page 33.
To turn off the player
Press [/1. The player enters standby mode.
You can have the player turn off automatically
whenever you leave it in stop mode for more than
30 minutes. To turn on this function, set "AUTO
POWER OFF" in "CUSTOM SETUP" to "ON"
Notes on playing DTS sound tracks on a CD
• When playing DTS-encoded CDs,
excessive noise will be heard from the
analog stereo jacks. To avoid possible
damage to the audio system, the consumer
should take proper precautions when the
analog stereo jacks of the player are
connected to an amplification system. To
enjoy DTS Digital Surround™ playback,
an external 5.1-channel decoder system
must be connected to the digital jack of the
• Set the sound to "STEREO" using the
AUDIO button when you play DTS sound
tracks on a CD (page 44).
• Do not play DTS sound tracks without first
connecting the player to an audio
component having a built-in DTS decoder.
The player outputs the DTS signal via the
DIGITAL OUT (COAXIAL or OPTICAL)
jack even if "DTS" in "AUDIO SETUP" is
set to "OFF" in the Setup Display (page 64),