Specifications - Sony DVP-NS305 Operating Instructions Manual

Specifications

System
Laser: Semiconductor laser
Signal format system: NTSC/PAL (See
page 16 to switch)
Audio characteristics
Frequency response: DVD VIDEO (PCM
96 kHz): 2 Hz to 44 kHz (±1.0 dB)/
DVD VIDEO (PCM 48 kHz): 2 Hz to 22
kHz (±0.5 dB)/CD: 2 Hz to 20 kHz
(±0.5 dB)
Signal-to-noise ratio (S/N ratio): 115 dB
(LINE OUT L/R (AUDIO) jacks only)
Harmonic distortion: 0.003 %
Dynamic range: DVD VIDEO: 103 dB/CD:
99 dB
Wow and flutter: Less than detected value
(±0.001% W PEAK)
The signals from LINE OUT L/R (AUDIO)
jacks are measured. When you play PCM
sound tracks with a 96 kHz sampling
frequency, the output signals from the
DIGITAL OUT (OPTICAL or COAXIAL)
jack are converted to 48 kHz sampling
frequency.
Outputs
(Jack name: Jack type/Output level/Load
impedance)
LINE OUT (AUDIO): Phono jack/2 Vrms/
Over 10 kilohms
DIGITAL OUT (OPTICAL)*: Optical
output jack/–18 dBm (wave length 660
nm)
DIGITAL OUT (COAXIAL): Phono jack/
0.5 Vp-p/75 ohms
LINE OUT (VIDEO): Phono jack/1.0
Vp-p/75 ohms
S VIDEO OUT: 4-pin mini DIN/Y: 1.0
Vp-p, C: 0.3 Vp-p (PAL), 0.286 Vp-p
(NTSC)/75 ohms
COMPONENT VIDEO OUT (Y, C
Phono jacks/Y : 1.0 Vp-p, C
C : 0.7 Vp-p/75 ohms
R
* DVP-NS415 only
General
Power requirements:
Power consumption: 12 W/13 W
Dimensions (approx.): 430
Mass (approx.): 2.3 kg
Operating temperature: 5 C to 35 C
Operating humidity: 25 % to 80 %
Supplied accessories
See page 15.
Specifications and design are subject to
change without notice.
E
NERGY
mark. As an
Sony Corporation has determined that this
product meets the
guidelines for energy efficiency.
, C ):
B R
,
B
220 – 240 V AC, 50/60 Hz
220 V AC, 60 Hz
110 V AC, 60 Hz
See page 2 for further information.
See page 2 for further information.
(w/h/d) incl. projecting parts
S
TAR is a U.S. registered
R
E S
NERGY
E
NERGY
62 255 mm
TAR Partner,
R
S
TAR
R
69