Before Use; Battery Installation; Prepare The Remote Control; Connections - Silvercrest SBMS 30 A1 Operation And Safety Notes

Bluetooth
®
Version
Maximum power
transmitted
Frequency bands
Dimensions
Main unit
Remote control
Distance
Angle
Battery type
The specification and design may be changed
without notification
˜ Before use
NOTES:
All parts have to be unpacked and the
packaging material has to be removed
completely .
Before use: Verify the package contents are
complete and undamaged!
˜ Battery installation
Remove the battery compartment cover
Insert 2 "AAA" size (R03) batteries . Make
sure that the batteries are inserted with
their positive "+"and negative "–" poles
positioned correctly .
Close the battery compartment cover
˜ Prepare the remote control
The remote control allows the product to be
operated from a distance .
Even if the remote control is operated within
the effective range (6 metres), remote control
operation may be impossible if there are
any obstacles between the product and the
remote control .
V 4 .2
5 dBm
2402 MHz – 2480 MHz
366 x 170 x 118 mm
(W x H x D)
6 m
30°
2 x 1 .5 V (AAA)
45
.
45
If the remote control is operated near other
products which generate infrared rays, or if
other remote control devices using infra-
red rays are used near the product, it may
operate incorrectly . Conversely, the other
devices may operate incorrectly .
˜ Connections
˜ Connect to an external device
You can also listen to an external audio
device through this product .
Use the 3 .5 mm to 3 .5 mm audio cable
to an external device and to the AUX IN
socket .
17
˜ Connect the FM aerial
(see fig . D)

Connect the FM aerial

socket . Position the aerial to obtain
16
optimum reception .
To avoid noise: Keep the FM aerial
from the product's power cord
˜ Connect power
(see fig . E)
m CAUTION! Risk of product damage!
Ensure that the power supply voltage
.
corresponds to the voltage printed on the
back or the underside of the product .
Before connecting the power cord
Ensure you have completed all other

connections .

Connect the power cord
outlet .
Turn the product off completely to save
energy when not in use .
˜ Basic operation
˜ Standby / ON
When you first connect the main unit to the
wall outlet and turn on the I / O button
will be in STANDBY mode .
47
to the FM ANT
48
away
48
.
46
:
46
to the wall
46
, it
18
GB/IE/NI 13