Surround Mode Settings - Sony DVP-NC650V Operating Instructions Manual

• DTS
When an LFE signal component is output,
"LFE" is enclosed in a solid line. When an
LFE signal component is not output, "LFE"
is enclosed in a broken line.
PROGRAM FORMAT
DTS 3/2.1
z
When the signal contains rear signal components
such as "LS," "RS" or "S," the Surround effect is
enhanced (page 58).
58
L C R
LFE
LS RS

SURROUND Mode Settings

You can enjoy surround sounds while
playing discs including Dolby Digital and
DTS DVDs, even if you have only 2 or 4
speakers. Select surround mode that best
suits your speaker setup.
DISPLAY
1
Press DISPLAY during playback.
The Control Menu appears.
2
Press X/x to select
(SURROUND), then press ENTER.
The options for "SURROUND" appear.
1
1 2 ( 2 7 )
1 8 ( 3 4 )
T 1 : 3 2 : 5 5
OFF
OFF
TVS DYNAMIC
3
Press X/x to select one of the
surround modes.
Refer to the following explanations given
for each item.
For 2 speaker setups
• TVS DYNAMIC
• TVS WIDE
• TVS NIGHT
• TVS STANDARD
SURROUND
X/x
ENTER
PLAY
DVD VIDEO