Sony DVP-NC650V Operating Instructions Manual page 57

z
You can select "AUDIO" directly by pressing
AUDIO. Each time you press the button, the item
changes.
Notes
• While playing a DVD, the sound may change
automatically.
• You cannot change the sound for SACDs.
Displaying the audio information of
the disc
When you select "AUDIO," the channels
being played are displayed on the screen.
For example, in Dolby Digital format,
multiple signals ranging from monaural to
5.1 channel signals can be recorded on a
DVD. Depending on the DVD, the number of
the recorded channels may differ.
1
1 2 ( 2 7 )
1 8 ( 3 4 )
T 1 : 3 2 : 5 5
1: ENGLISH
Currently playing program format**
* "PCM," "DTS," or "DOLBY DIGITAL" is
displayed.
In the case of "DOLBY DIGITAL," the
channels in the playing track are displayed
by numbers as follows:
For Dolby Digital 5.1 ch:
DOLBY DIGITAL 3 / 2 . 1
Front component 2+
Centre component 1
Current audio format*
PLAY
DVD VIDEO
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
L C R
LFE
LS RS
Rear component 2
LFE (Low Frequency
Effect) component 1
**The letters in the program format display
mean the following sound component.
L: Front (left)
R: Front (right)
C: Center
LS: Rear (left)
RS: Rear (right)
S: Rear (monaural): The rear
component of the Dolby Surround
processed signal and the Dolby
Digital signal
LFE: Low Frequency Effect signal
The display examples are as follows:
• PCM (stereo)
PROGRAM FORMAT
PCM 96kHz 24bit
L
• Dolby Surround
PROGRAM FORMAT
DOLBY DIGITAL 2/0
DOLBY SURROUND
L C
S
• Dolby Digital 5.1ch
When an LFE signal component is output,
"LFE" is enclosed in a solid line. When an
LFE signal component is not output, "LFE"
is enclosed in a broken line.
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
L C
LFE
LS
R
R
R
RS
continued ,
57