Step 2: Connecting The Audio Cords - Sony DVP-NC650V Operating Instructions Manual

Step 2: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. The surround effects
you will enjoy depend on the connections and components you use.
Select a connection
Select one of the following connections,
Connection
(page 21)
A
(page 22)
B
(page 22)
B
(page 24)
C
(page 24)
C
(page 26)
D
z
To enjoy SACD Multi or 96 kHz/24 bit sound, use connection
* Manufactured under license from Dolby Laboratories. "Dolby," "Pro Logic," and the double-D symbol are
trademarks of Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories. All rights
reserved.
** Manufactured under license from Digital Theater Systems, Inc. US PAT. No. 5,451,942 and other world-wide
patents issues and pending. "DTS" and "DTS Digital surround" are trademarks of Digital Theater Systems, Inc.
© 1996 Digital Theater Systems, Inc. All rights reserved.
20
through
A
Components to be connected
TV (stereo)
AV amplifier (receiver) having 5.1ch input jacks
• 4 speakers
(front L and R, rear L and R)
• 6 speakers
(front L and R, center, rear L and R, subwoofer)
AV amplifier (receiver) having a Dolby* Digital or DTS** decoder,
and a digital input jack
• 6 speakers
(front L and R, center, rear L and R, subwoofer)
Stereo amplifier (receiver)
(having L and R audio input jacks only, or having a digital input jack)
• 2 speakers
(front L and R)
MD deck/DAT deck
AV amplifier (receiver) with a Dolby Surround (Pro Logic) decoder
(having L and R audio input jacks only, or having a digital input jack)
• 3 speakers
(front L and R, and rear (monaural))
• 6 speakers
(front L and R, center, rear L and R, subwoofer)
.
D
.
B