Sony DVP-NC650V Operating Instructions Manual page 35

To
Check if a disc is in the
disc compartment
z
The Replay function is useful when you want to
review a scene or dialog that you missed.
z
Before loading the discs, a DISC SELECT
indicator of an empty compartment may be lit.
Notes
• You may not be able to use the Replay function with
some scenes.
• If you turn the power off by pressing POWER on the
player, the loading information will be reset.
Replacing discs while playing a disc
(EXCHANGE)
You can open the disc tray while playing a
disc so that you can check which discs are to
be played next and replace discs without
interrupting playback of the current disc.
.
EXCHANGE
1
Press EXCHANGE.
The disc tray opens and two disc
compartments appear. Even if the player
is playing a disc, it doesn't stop playing.
2
Replace the discs in the compartments
with new ones.
3
Press DISC SKIP.
The disc tray turns and another two disc
compartments appear.
Operation
Press LOAD on the
player.
The DISC SELECT
indicator for each
compartment (1 - 5)
containing a disc lights
up.
DISC SKIP
4
Replace the discs in the compartments
with new ones.
5
Press EXCHANGE.
The disc tray closes.
z
While the disc tray is open,
– If the playback of the current disc ends, the player
stops playing. If the disc is played in One Disc
Repeat Play mode, the current disc starts playing
again.
– In All Discs Shuffle Play mode (page 43), titles/
tracks/chapters are reshuffled only on the current
disc.
– In Program Play mode (page 41), the titles/tracks/
chapters only on the current disc are played.
Note
Do not push the disc tray to close in Step 5, as you may
damage the player.
35