Sony DVP-NC650V Operating Instructions Manual page 26

Sacd/dvd player

Hide thumbs Also See for DVP-NC650V:

Table of Contents

Connecting to a Dolby Surround (Pro Logic) decoder amplifier (receiver) and

3 to 6 speakers

This connection will allow you to enjoy the surround effects of the Dolby Surround (Pro Logic)

decoder on your amplifier (receiver). If you have an AV amplifier (receiver) equipped with a

Dolby Digital or DTS decoder, refer to page 22.

You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or

multichannel audio (Dolby Digital) discs.

This connection needs a minimum of 3 speakers (front L and R, and rear (monaural)). The

surround effects are enhanced if 6 speakers (front L and R, center, rear L and R, and subwoofer)

are used.

If your amplifier (receiver) has R and L audio input jacks only, use

(receiver) has a digital input jack, use

xRecommended surround sound effects using this connection with your amplifier (receiver)

• Dolby Surround (Pro Logic) (page 92)

For correct speaker setting location, please refer to the operating instructions of the amplifier (receiver).

Note

SACD audio signals are not output from a digital jack.

D-2

. If your amplifier

D-1

Table of Contents