Sony DVP-NC650V Operating Instructions Manual page 22

B Connecting to an AV amplifier (having 5.1ch input jacks or a digital input
jack) and 4 to 6 speakers
If your AV amplifier (receiver) has 5.1 channel inputs, use
If you want to use the Dolby Digital or DTS decoder function on your AV amplifier (receiver),
connect to its digital jack using
realistic audio presence in the comfort of your own home.
: Connecting to the 5.1ch input jacks
B-1
You can enjoy 5.1ch surround sound using the internal Dolby Digital, DTS or SACD Multi
decoder of this player. You can also enjoy Dolby Surround (Pro Logic) sounds, or surround
sounds using various "SURROUND" modes (page 58).
xRecommended surround sound effects for this connection
When 6 speakers are connected (Set "SURROUND" to "OFF.")
• Dolby Digital (5.1ch) (page 92)
• DTS (5.1ch) (page 92)
• SACD Multi-channel (page 93)
: Connecting to a digital jack
B-2
This connection will allow you to use the Dolby Digital or DTS decoder function of your AV
amplifier (receiver). You are not able to enjoy the surround sound effects of the player.
xRecommended surround sound effects using this connection with your amplifier (receiver)
• Dolby Digital (5.1ch) (page 92)
• DTS (5.1ch) (page 92)
• 96 kHz/24 bit PCM
z
Refer to the operating instructions of the AV amplifier (receiver) for correct speaker setting location when using
B-2
the connection.
Notes
• After you have completed the connection, be sure to set "DOLBY DIGITAL" to "DOLBY DIGITAL" (page 84)
and "DTS" to "DTS" (page 85). Otherwise, no sound or a loud noise will come from the speakers.
• When you connect an amplifier (receiver) that conforms to the 96 kHz sampling frequency, set "48kHz/96kHz
PCM" to "96kHz/24bit" (page 85).
• SACD audio signals are not output from a digital jack.
22
. With the following connections, you can enjoy a more
B-2
.
B-1