User Sample; Sample List - Roland V-Drums TD-50 Data List

USER SAMPLE

SAMPLE LIST

Parameter
[F5] button
LIST tab
Play Type
START/END tab
Zoom ([R1] knob)
Start ([R2] knob)*1
End ([R3] knob)*1
*1 You can't set the end point earlier than the start point.
You can't set the start point and end point to the same value.
For both the start point and end point, you can't specify a value that exceeds the length of the user sample.
18
Value
Renames the currently selected user sample.
Reference
For details on how to assign a name, refer to "Renaming a Drum Kit" in "Reference Manual" (PDF).
Specifies how the user sample is sounded.
ONESHOT MONO
ONESHOT POLY
LOOP ALT
–
0–07937742
257–07937999
Explanation
When you strike the pad, the currently-heard sound is silenced before the new sound is heard.
Notes do not overlap.
When you strike the pad repeatedly, the sounds of the notes are heard overlapping.
The user sample plays repeatedly (loop).
Each time you strike the pad, the sound alternately plays or stops.
Zooms the waveform display in or out.
You can zoom-in/out on the horizontal axis by turning the [R1] knob or by holding down the
[SHIFT] button and pressing the cursor [ K ] [ J ] buttons.
If you hold down the [SHIFT] button and turn the [R1] knob or use the cursor [ H ] [ I ] buttons, you'll
zoom-in/out on the vertical axis.
Adjusts the start point (the location at which the user sample starts playing).
Adjusts the end point (the location at which the user sample stops playing).