Usb Firmware Upgrade - Kensence FMX Series Operation Manual

9.USB firmware upgrade

When firmware update, repair or function change, support for program updates,
provides front panel USB port upgrade, upgrading the system program through the front
panel "firmware" port, the latest upgrade program can contact our company technical and
sales personnel.
The upgrade steps are as follows:
1. Download the upgrade software to your computer;
2. Connect the front panel "FIRMWARE" interface to the computer's USB interface with
Micro USB Micro line;
3.Run the upgraded software, double click the software icon, as shown below:
4 Open the upgrade software to enter the following interface;
Click "Connect USB" connect computer to the host;

Click "Open", choose to download the upgrade file;

Click "Updata", the system began to upgrade.

After the completion of the upgrade, pop-up "Updata success " dialog box, the program
upgrade successfully.
Fig 9.1 Upgrade software
Fig 9.2 Upgrade software interface