Sharp KP-19S Service Manual page 8

1. Upside down the unit and pry the rotating base by inserting a putty knife to remove the rotating base.
2. Remove 2 screws holding bottom cover to mounting bracket at the bottom of inner pot.
3. Disconnect 3 lead wires from plug plate ass'y.
4. Detach the lamp insulator cover together with the neon lamp assembly out of of the bottom cover.
5. Push the claws and remove the plug plate.
6. Now the bottom cover is free.
Fig. 6
1. Remove the bottom cover in accordance with "REMOVE OF BOTTOM COVER".
2. Push the claws and remove the plug plate out of the bottom cover.
3. Now the plug plate ass'y is free.
1. Remove the bottom cover in accordance with "REMOVE OF BOTTOM COVER".
2. Detach the lamp insulator cover to together
with the neon lamp assembly out of the
bottom cover.
3. Pull the lamp assembly out from lamp
insulator cover.
4. Remove 3 lead wires to neon lamp ass'y.
5. Now the neon lamp ass'y is free.
REMOVE OF BOTTOM COVER
Rotating base
Bottom cover
Neon lamp
lead wire
Bottom cover
REMOVE OF PLUG PLATE ASSEMBLY
REMOVE OF NEON LAMP ASS'Y
8
Temp. fuse lead wire blue
Lamp insulator cover
Bottom cover
Fig. 7
Fig. 8
Plug plate
Heater set
lead wire
Screw
Lamp insulator cover
Neon lamp ass'y
Lead wire
Bottom cover