Sharp KP-19S Service Manual page 13

Problem
During boiling, steam escapes
from around the push button
or dew collects inside the
outer lid.
Hot water leaks.
Stained inner pot.
Check point
Steam route.
Steam tube packing.
Bellow cap packing-B.
Using place.
Water level.
Inner pot.
Upper and lower
connectors.
Inner pot packing.
Steam discharge route.
Inner pot.
13
Possible cause
Steam pipe dislocated.
Deteriorated perforated.
Use at an inclined place.
Water is fi lled more than full
water level.
Perforated.
Defective rubber joints.
Disconnected joints.
Deteriorated.
Stuffed with foreign matters.
Spot stain.
Discolouring.
Correction action
Set correctly.
Replace.
Instruct the users to use the
pot on a level place.
Instruct the users not to feed
water more than full
water level.
Replace.
Replace.
Set correctly.
Replace.
Remove foreign matters.
Caused by adhesion of iron
content in water. Explain the
users that such adhesion
does not affect the corrosion
resistance of stainless steel.
Caused by water quality and
this has no effect on the
corrosion resistance of
stainless steel.