How To Proceed If A Repair Is Necessary - Siemens SITRANS LVL200E Operating Instructions Manual

12
Corresponding torques: see chapter "Technical data".
Hence the clamp (1) is pressed against the tube and fixes the
tube of the sensor in this position
16. Fasten the locking angle (4) with the fixing screw (6) and the
spring ring (5) laterally on the pressure screw (11)
Hence the pressure screw and the terminal screw are secured
against unintentional loosening
5.3

How to proceed if a repair is necessary

If it is necessary to repair the instrument, please con-
tact Siemens. You find the locations on our homepage
"www.siemens.com/processautomation".
Lock fitting - Operating Instructions MAN-100057