(Speaker Formation) Calibrating The Appropriate Settings Automatically; (Auto Calibration) - Sony DAV-DZ210D Operating Instructions Manual

Note
• In order to enjoy the surround sound after you change
the position of the speakers, it is recommended you
set [SPEAKER FORMATION], and then set [AUTO
CALIBRATION].
• To set [AUTO CALIBRATION], you need to
connect the supplied calibration mic.
• The front panel display indicates the selected
[SPEAKER FORMATION]. It does not indicate the
speakers which output sound.
• When you change the [SIZE] setting in [SPEAKER
SETUP], the [SPEAKER FORMATION] setting
returns to [STANDARD].
Calibrating the
Appropriate Settings
Automatically

(AUTO CALIBRATION)

D. C. A. C. (Digital Cinema Auto Calibration)
can set the appropriate surround sound
automatically.
Note
• Loud test sound is output when [AUTO
CALIBRATION] starts. You cannot turn the volume
down. Give consideration to children and neighbor.
1
Press FUNCTION repeatedly until
"DVD" appears in the front panel
display.
2
Press DISPLAY when the system is
in stop mode.
The Control Menu appears.
3
Press X/x to select
FORMATION], then press ENTER.
1 ( 4 4 )
3 ( 2 8 )
T 0 : 0 3 : 0 4
SPEAKER FORMATION
SPEAKER FORMATION
AUTO CALIBRATION
4
Press X/x to select [AUTO
CALIBRATION], then press ENTER.
The options for [AUTO CALIBRATION]
appear.
AUTO CALIBRATION
Connect calibration mic. Start
measurement?
YES
NO
Connect the calibration mic to the A.CAL
MIC jack on the front panel, and set it up at
the ear level using a tripod, etc. (not
[SPEAKER
DVD VIDEO
continued
63
GB