Sony DAV-DZ210D Operating Instructions Manual page 54

Listening to a DAB station by
using a preset number
Preset DAB radio stations in the system's
memory first (see "Presetting DAB stations"
(page 53)).
1
Press FUNCTION repeatedly until
"DAB" appears in the front panel
display.
The last received station is tuned in.
2
Press PRESET + or – repeatedly to
select the preset station you want.
Each time you press the button, the system
tunes in one preset station. You can also
select the number by pressing the number
buttons. Press the number buttons, and then
press ENTER.
3
Adjust the volume by pressing
VOLUME +/–.
Note
• If there is no stored preset station, or no registered
preset number, "NO PRESET" appears in the front
panel display.
• Primary service is automatically received when
secondary service ends.
Viewing the DAB station
information in the front panel
display
Press DISPLAY repeatedly.
Each time you press DISPLAY while tuning in
a DAB station, the display changes 1 t 2 t
... t 1 t ...
1 Service component label
2 Dynamic label segment
3 Channel label and frequency
4 Preset number
1)
If a station does not provide the Dynamic label
segment, "NO TEXT" is displayed.
2)
Returns to the service component label after about 4
seconds.
3)
If the currently received station is not preset, this is
skipped.
Note
• If tuning a DAB station, the following appears in the
front panel display:
54
GB
1)
2)
2)3)
– "OTHER LANG" is displayed when the system
does not support the language.
– All text is displayed in capital letters.
– A character which cannot be displayed is replaced
by a blank space.
• When "ST" appears in the front panel display, the
current program is broadcasted in the stereo/joint
(intensity) stereo mode.