Step 3: Performing The Quick Setup - Sony DAV-DZ210D Operating Instructions Manual

Step 3: Performing the
Quick Setup
Follow the steps below to make the minimum
number of basic adjustments for using the
system.
C/X/x/c
ENTER
1
Turn on the TV.
2
Press [/1.
Note
• Disconnect the headphones when you perform
the Quick Setup. You cannot operate steps after
12 with the headphones connected.
• Make sure that the function is set to "DVD."
3
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
[Press [ ] to run QUICK SETUP.]
ENTER
appears at the bottom of the screen. If this
message does not appear, display the Quick
Setup and perform again (page 18).
4
Press ENTER without inserting a disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
16
GB
5
Press X/x to select a language.
"/1
The system displays the menu and subtitles
in the selected language.
6
Press ENTER.
The Setup Display for selecting the aspect
ratio of the TV to be connected appears.
DISPLAY
7
Press X/x to select the setting that
matches your TV type.
x If you have a 4:3 standard TV
[4:3 LETTER BOX] or [4:3 PAN SCAN]
(page 67)
x If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
[16:9] (page 67)
8
Press ENTER.
The Setup Display for selecting the output
method for video signals from the EURO
AV T OUTPUT (TO TV) jack on the rear
panel of the system appears.
9
Press X/x to select the output method
for video signals.
• [VIDEO]: outputs video signals.
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
PORTUGUESE
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
4:3 LETTER BOX
BACKGROUND:
4:3 PAN SCAN
LINE:
4:3 OUTPUT:
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND: JACKET PICTURE
LINE:
4:3 OUTPUT:
ENGLISH
ENGLISH
FRENCH
SPANISH
16:9
16:9
FULL
16:9
ON
VIDEO
VIDEO
RGB