Operation - ABB PowerValue 11 RT G2 Quick Manual

—

Operation

You can operate the UPS through
the user-friendly display
Battery mode
Online mode
LED's
LCD display
Selection keys
Escape
UPS start-up
To start up the UPS with mains
supply:
1. Check that all cables are securely
and correctly connected.
2. Keep the power button pressed
for longer than 1 s. The fans will
activate and the UPS will load for
a few seconds.
3. The UPS will perform a self-test
and the LCD will show the default
UPS status screen.
O P E R AT I O N
Battery Load
20
Min
ESC
Up
(see chapter 4 of the user manual
for a full list of possible operations).
100
%
Output
230 50
V
Hz
Down Enter
To start up the UPS without mains
supply (cold start):
1. Check that all cables are securely
and correctly connected.
2. Keep the power button pressed
for longer than 1 s. The UPS will
power on, the fans will activate
and the LCD will turn on. The UPS
will perform a self-test and show
the default UPS status screen.
3. Keep the power button pressed
for longer than 1 s. The alarm
buzzer will sound for 1 s and the
UPS will start up.
Bypass mode
Fault
On/Off
17