Meaning Of The Leds - ZyXEL Communications VMG5304 Series Quick Start Manual

Meaning of the LEDs

PWR (Power)
green on Power supply present.
flashing Device is being initialized or
green reset to the factory settings.
red on Device error detected, e.g., error
during self-test.
flashing New firmware is being loaded.
red Please wait.
off Power supply not present
DSL
on Successfully connected to
DSL.
flashing DSL synchronization is in
quickly progress.
flashing DSL connection being established
slowly or synchronization failed, e.g.,
because the DSL cable is not
plugged in or DSL is not available.
off DSL interface not activated.
INET (Internet)
green on Internet connection successfully
established.
red on Internet connection setup failed,
e.g., due to incorrect access
credentials
off No DSL connection, or the device
is being operated in modem mo-
de.
TEL (telephone)
green on SIP registration successful.
red on At least one SIP registration
failed, e.g., due to incorrect SIP
data.
off Internet telephony not enabled.
WLAN
green on Wi-Fi enabled.
flashing Wi-Fi being enabled or
green disabled, e.g., after pressing the
WLAN button.
flashing After you press the WPS button,
orange WPS stays active for 2 minutes.
off Wi-Fi is disabled
WPS is not active.
EN
©2017 | 25