Table of Contents
Advertisement
Refresh mode
Due to the characteristics of the device, images
imported in the internal memory may generate
a reading error after a long time or many data
readings. Such images may not display
correctly.
This unit refreshes the internal memory
automatically to prevent these errors,
depending on the status of the internal memory.
The confirmation screen used for refreshing the
internal memory is displayed automatically
when the refresh is needed.
The refresh starts when you select [Yes]. The
Refresh also starts automatically when no
operation is attempted for 30 seconds. If you
select [No], the confirmation screen used for
refreshing the internal memory is displayed the
next time.
Do not turn this unit off while the internal
memory is being refreshed. It may cause a
malfunction.
It may take approximately 5 minutes to refresh
the internal memory.
Notes
• We recommend that you perform a backup of your
data periodically to avoid losing it.
• Do not run a slideshow with less than 10 images
continuously if you have set the interval time for the
slideshow to 3 seconds. You may not be able to
protect some images in the internal memory.
GB
44
Specifying the playback
device
You can specify whether to display a memory
card or the internal memory.
1
Press SELECT DEVICE.
Tips
• When operating from the main unit, press
the MENU and use the B/b buttons to
select the
• If the memory card you want to select is
not inserted, insert it now.
Notes
• During clock and calendar display, you
cannot select the
2
Press v/V to select a device to
display the image and press
The images of the selected device are
displayed.
(Select device) tab.
(Select device) tab.
.
Advertisement
Table of Contents
