Table of Contents
Advertisement
Symptom
The picture quality
and colors of the
image previewed
on the screen
differs from those
printed.
The printed image
differs when an
image is printed
directly from the
memory card and
the internal
memory, and
when it is printed
via a computer.
The date cannot be
printed.
The date is printed
unintentionally.
The image cannot
be printed fully in
the print range.
Borders remain.
GB
92
Check item
—
—
• Is [Date Print] set to [Date]
or [Date/Time]?
• Does the image support
DCF?
• Are you printing in
slideshow mode?
• Is [Date Print] set to [OFF]?
• Was the date saved with the
image when it was shot with
the digital camera?
• Did you select [Border 1] or
[Border 2] for [Borders] in
the Print setup menu?
• Is the aspect ratio of the
image correct?
Cause/Solutions
c This is not a malfunction, but is caused by
variations in the color reproduction
system or LCD characteristics. Images are
adjusted to best suit the color reproduction
system and characteristics. You can
change the image quality settings as
follows.
– MENU button - [Settings] - [Print
Settings] - [Color Setting] (.page
66)
– Adjusting image quality is only
available in the CreativePrint menu. For
details, see page 59.
c Because of the differences in this unit's
internal processing and computer software
processing, the printed images will be
different.
c Press MENU button, select [Settings] and
set [Date Print] in the Print Settings to
[Date] or [Date/Time]. (.page 65)
c The Date Print function of this unit
supports an image that is compatible with
the DCF standards.
c The layout of the LCD screen is printed as
it appears, so the Date Print setting is
invalid.
c Press MENU button, select [Settings] and
set [Date Print] in the Print Settings to
[OFF]. (.page 65)
c When the date was saved with the image,
you cannot make a print without a date.
c Press MENU button, select [Settings] and
set [Borderless] by selecting [Print
Settings] - [Borders]. (.page 65)
c Depending on the type of digital camera
used, the aspect ratio of the recorded
image differs, so the image may not be
printed covering the entire printable area.
Advertisement
Table of Contents
