Table of Contents
Advertisement
In certain frontal collisions, the pre-
tensioner will activate and pull the
seat belt into tighter contact against
the occupant's body.
WARNING
•
Always wear your seat belt and
sit properly in your seat.
•
Do not use the seat belt if it is
loose or twisted. A loose or
twisted seat belt will not protect
you properly in an accident.
•
Do not place anything near the
buckle. This may adversely
affect the buckle and cause it to
function improperly.
•
Always replace your pre-ten-
sioners after activation or an
accident.
•
NEVER inspect, service, repair
or replace the pre-tensioners
yourself. This must be done by
an authorized HYUNDAI dealer.
•
Do not hit the seat belt assem-
blies.
WARNING
Do not touch the pre-tensioner
seat belt assemblies for several
minutes after they have been acti-
vated. When the pre-tensioner
seat belt mechanism deploys dur-
ing a collision, the pre-tensioner
can become hot and can burn
you.
CAUTION
Body work on the front area of the
vehicle may damage the pre-ten-
sioner
seat
belt
system.
Therefore, we recommend that
the system be serviced by an
authorized HYUNDAI dealer.
OLMB033040/H/Q
The seat belt pre-tensioner system
consists mainly of the following com-
ponents. Their locations are shown in
the illustration:
(1) SRS air bag warning light
(2) Retractor pre-tensioner assembly
(3) SRS control module
Advertisement
Table of Contents
