■ Room lamp (without sunroof)
■ Luggage room lamp
1. Using a flat-blade screwdriver,
gently pry the lens from the interi-
or lamp housing.
2. Remove the bulb by pulling it
straight out.
WARNING
Prior to working on the Interior
lamps, ensure that the "OFF" but-
ton is depressed to avoid burning
your fingers or receiving an elec-
tric shock.
3. Install a new bulb in the socket.
4. Align the lens tabs with the interior
OGS075049
lamp housing notches and snap
the lens into place.
NOTICE
U U se care not to dirty or damage lens,
lens tab, and plastic housings.
OGS075048