Hyundai Creta 2019 Owner's Manual page 306

Hide thumbs Also See for Creta 2019:
Table of Contents

Advertisement

If you have a tire gauge, check the
tire pressure (see "Tires and Wheels"
in chapter 8 for tire pressure instruc-
tions.). If the pressure is lower or
higher than recommended, drive
slowly to the nearest service station
and adjust it to the recommended
pressure. Always reinstall the valve
cap after checking or adjusting tire
pressure. If the cap is not replaced,
air may leak from the tire. If you lose
a valve cap, buy another and install it
as soon as possible. After changing
tires, secure the flat tire and return
the jack and tools to their proper stor-
age locations.
i
I I nformation
Check the tire pressure as soon as pos-
sible after installing a spare tire.
Adjust it to the recommended pres-
sure.
NOTICE
Your vehicle has metric threads on
the studs and lug nuts. Make certain
during tire changing that the same
nuts that were removed are rein-
stalled. If you have to replace your
lug nuts make sure they have metric
threads to avoid damaging the studs
and ensure the wheel is properly
secured to the hub. We recommend
that you consult an authorized
HYUNDAI dealer for assistance.
If any of the equipment such as the
jack, lug nuts, studs, or other equip-
ment is damaged or in poor condi-
tion, do not attempt to change the
tire and call for assistance.

Advertisement

Table of Contents
loading

Table of Contents