Seat Belt Warning; Lap/Shoulder Belt; To Fasten Your Seat Belt - Hyundai Creta 2019 Owner's Manual

Hide thumbs Also See for Creta 2019:
Table of Contents

Advertisement

S S eat belt warning
As a reminder to the driver's seat belt
warning light and passenger's seat
belt warning light (if equipped) will
illuminate for approximately 6 sec-
onds each time you turn the ignition
switch ON regardless of belt fasten-
ing.
If the driver's seat belt or the front
passenger's seat belt is not fastened
when the ignition switch is turned ON
or if it is disconnected after the igni-
tion switch is turned ON, the seat
belt warning light will illuminate until
the belt is fastened.
If you continue not to fasten the seat
belt and you drive over 9 km/h, the
illuminated warning light will start to
blink until you drive under 6 km/h.
If you continue not to fasten the seat
belt and you drive over 20 km/h (12
mph) the seat belt warning chime will
sound for approximately 100 sec-
onds and the corresponding warning
light will blink.
i
Information
• You can find the front passenger's
1GQA2083
seat belt warning light on the clus-
ter. (if equipped)
• Although the front passenger seat is
not occupied, the seat belt warning
light will blink or illuminate for 6
seconds. (if equipped)
• The front passenger's seat belt
warning may operate when luggage
is placed on the front passenger seat.
(if equipped)

Lap/shoulder belt

To fasten your seat belt:

To fasten your seat belt, pull it out of
the retractor and insert the metal tab
(1) into the buckle (2). There will be
an audible "click" when the tab locks
into the buckle.
ODH033055

Advertisement

Table of Contents
loading

Table of Contents