Electric type (if equipped)
Adjusting the rearview mirrors:
Press either the L (Left) or R (Right)
button (1) to select the rearview mir-
ror you would like to adjust.
Use the mirror adjustment controller(2)
to position the selected mirror up,
down, left or right.
After adjustment, put the lever into
neutral (center) position to prevent
inadvertent adjustment.
NOTICE
• • The mirrors stop moving when
they reach the maximum adjusting
angles, but the motor continues to
operate
while
pressed. Do not press the switch
longer than necessary, the motor
may be damaged.
• Do not attempt to adjust the out-
side rearview mirror by hand or the
motor may be damaged.
OGS045015
Folding the outside rearview mir-
ror
the
switch
is
Manual type
To fold the outside rearview mirror,
grasp the housing of the mirror and
then fold it toward the rear of the
vehicle.
OGC044024