Filter Replacement - Hyundai Creta 2019 Owner's Manual

Hide thumbs Also See for Creta 2019:
Table of Contents

Advertisement

Filter replacement

You can clean the filter when inspect-
ing the air cleaner element.
Clean the filter by using compressed
air.
1. Loosen the air cleaner cover
attaching clips and open the cover.
2. Remove the used filter and wipe
OGS075010
the inside of the air cleaner hous-
ing carefully not to remain dusts in
the cover housing.
3. Place new filter with clean hands
and ensure the rubber gasket is
not taken off.
4. Lock the cover with attaching clips.
Replace the filter according to the
Maintenance Schedule.
If the vehicle is operated in extreme-
ly dusty or sandy areas, replace the
element more often than the usual
recommended intervals. (Refer to
"Maintenance under severe usage
conditions" in this chapter.)
NOTICE
• Do not drive with the filter
removed; this will result in exces-
sive engine wear.
• When replacing the air cleaner fil-
ter, be careful that dust or dirt does
not enter the air intake, or damage
may result.
Keep the new filter clean of any
contamination while replacing.
OGS075011
• We recommend that you use parts
for replacement from an author-
ized HYUNDAI dealer.
CAUTION
Don't clean the used filter. It can
cause contaminations on the
clean side of filter to result in
engine wear or sensors' failure.

Advertisement

Table of Contents
loading

Table of Contents