Miele HS18 Operating Instructions Manual page 54

Finishing vacuuming if vacuuming
started from somewhere in the room
The robot vacuum cleaner will return to
its starting point and switch into
standby after approx. 60 seconds.
The robot vacuum cleaner will stand
still when there is low battery capacity.
You should then recharge it.
Manually operated vacuuming
You can use the direction buttons on
the remote control to vacuum a particu-
lar area of the room.
 While the robot vacuum cleaner is va-
cuuming, press and hold one of the
direction buttons.
The robot vacuum cleaner will turn in
the desired direction until you let go of
the direction button.
 Press and hold the + direction button.
The robot vacuum cleaner will travel in
the desired direction and continue to
vacuum.
 Press the  button on the remote
control or the  sensor field on the
display.
18
The original vacuuming process will
continue running.
Interrupting vacuuming
 Press the  button on the remote
control or the  sensor field on the
display.
The robot vacuum cleaner stops.
Press the button or the sensor field
again to continue vacuuming.
Manual navigation (without vacuum-
ing)
You can use the direction buttons on
the remote control to direct the robot
vacuum cleaner to a specific area of the
room.
 Press and hold one of the direction
buttons.
The robot vacuum cleaner will travel in
the desired direction without vacuum-
ing.
You cannot direct the robot vacuum
cleaner manually to the base station in
order to recharge it.
Directing the robot vacuum cleaner
to the base station
(only possible when vacuuming was
started from the base station)