Use - Miele HS18 Operating Instructions Manual

 Place the magnetic strip supplied
with the groove facing downwards on
the floor.
The robot vacuum cleaner will not cross
over the magnetic strip.
Adhesive strips are supplied for per-
manent fixing. Additional magnetic
strips are available to order from the
Miele webshop.

Use

Always observe the robot vacuum
cleaner during the first cleaning ses-
sion in a new environment and after
making changes in your home. This
way you will be able to detect and
remove any problematic obstacles or
section off the relevant areas with
the magnetic strip. You must also
check whether steps and drops in
height are recognised properly.
The operation of the robot vacuum
cleaner via display will be described
later in this "Use" section.
Switching on and off
 Press the Power button on the re-
mote control or any sensor field on
the display.
Starting vacuuming
There are two ways to start vacuuming.
Option 1 (Remote control)
 Press the  button.
Option 2 (Display)
 Press the  sensor field.
The area to be vacuumed will be
cleaned.
The robot vacuum cleaner always
cleans for at least five minutes, regard-
less of the size of the surface to be va-
cuumed.
Finishing vacuuming if vacuuming
started from the base station
The robot vacuum cleaner will return to
the base station and recharge.
If the battery is low, the robot vacuum
cleaner will return to the base station
and recharge. II will appear in the in-
dicator field. The robot vacuum
cleaner will then carry on vacuuming
in the location where it had stopped.
17