Cleaning Main Brush And Side Brushes - Vileda VR 302 User & Care Manual

4.2 Cleaning main brush and side brushes

CLEANING OF SIDE BRUSHES
Check the side brushes after every use and remove dust and dirt stuck to the sidebrushes. Maximum life span for
side brush is 12 months.
NOTE: Before replacing side brushes, please pay attention to the left mark and the right ( 'L'/ 'R' ) mark on side
brushes, which match with the 'L'/ 'R' mark on the bottom base of robot.
CLEANING OF SIDE BRUSHES
Release the clamp on the right side
of the main brush kit and take it out
of the robot
Open the main brush cover
1. Let the lid of the main brush face
yourselves.
2. Both hands thumb holding the lid
of the main brush, push the red
part up.
3. Remove the cover of main brush.
Remove the main brush
1. Lever the red main brush retainer.
2. Remove the main brush from the
holder.
3. Clean the brush and the brush
holder, by either using the
maintenance brush or running
water.
NOTE: If hair got knotted on the main
brush, you can use a small scissor to
cut and remove it easily.
4. Re-install the main brush in the
original order of disassembly
after it's fully dry.
5. Check if side brush can rotate
free. Take care that the side
brushes are not trapped by the
main brush kit.
S
15