Alarm Recording Tab - Setting The Image Memory Function When Detecting The Alarm - Sony IPELA SNC-RX550N User Manual

Selected root directory
Select a memory in which you want to save an image.
The current memory space is displayed on the right.
Memory Stick: "Memory Stick" inserted into the
memory stick slot of the camera.
ATA memory card: ATA memory card inserted into
the PC card slot of the camera.
Note
Use the ATA memory card when you record images
using periodical recording with a short interval or record
them frequently.
Overwrite
Select On to overwrite the file or not when there is
insufficient memory space to record the image on the
"Memory Stick" or ATA memory card.
On: Overwrite is enabled and old files will be
overwritten in the order of date.
Off: Overwrite is prohibited. No recording will be
performed.
Capacity warning
Select On to send a warning mail to the Administrator
when the memory space of the "Memory Stick" or ATA
memory card is low or the memory is full. Select Off if
you do not want to send a warning mail.
Note
When Overwrite is set to On, a warning mail is not sent
to the Administrator.
SMTP server name
Type the name of the SMTP server for sending an e-
mail, using up to 64 characters.
Otherwise type the IP address of the SMTP mail server.
Authentication
Select the authentication required when you send an e-
mail.
Off: Select if no authentication is required when an e-
mail is sent.
On: Select if authentication is required when an e-mail
is sent.
Select one of the authentication methods from the
following and specify the POP server name, User
name and Password as required.
SMTP: Select when SMTP authentication is
required.
POP before SMTP: Select when POP before SMTP
authentication is required.
56
Recording Images in Memory — Image memory Menu
Note
When you set Authentication to On, be sure to select
either or both SMTP or/and POP before SMTP.
POP server name
This is necessary when POP before SMTP is selected
for Authentication.
Type a POP (receiving mail) server name using up to 64
characters, or type the IP address of the POP server. This
setting is necessary when the SMTP server that sends e-
mails performs authentication using the POP user
account.
User name, Password
Type the user name and the password of the user who
owns the e-mail account. This setting is necessary when
the SMTP server that sends e-mails performs
authentication.
Administrator e-mail address
Type the e-mail address of the recipient of a warning
mail (e-mail address of the camera Administrator),
using up to 64 characters.
OK/Cancel
See "Buttons common to every menu" on page 30.
Alarm recording Tab — Setting the
Image memory function when
detecting the alarm
You can set to record the image and audio file to the
memory linked with the external sensor input or with the
built-in object detection function.
Alarm recording
Select On to set recording of the image and audio file to
a "Memory Stick" or ATA memory card linked with
alarm detection.