Controlling Alarm Output 1, 2; Controlling Day/Night Function - Sony IPELA SNC-RX550N User Manual

Controlling Alarm
Output 1, 2
You can control On (short-circuit) and Off (open) of
Alarm Output 1, 2.
To use this function, you need to make Alarm output 1
or Alarm output 2 active in the Trigger menu of the
Administrator menu (page 62).
1
Display the image on the monitor window.
2
Select Alarm output1 or Alarm output2 from the
trigger drop-down list.
3
Click .
Each click switches the alarm output alternately
between On (short-circuit) and Off (open).
Tip
For the connection of peripheral devices to the alarm
output of the I/O port, see the supplied Installation
Manual.
26
Controlling Alarm Output 1, 2 / Controlling Day/Night Function
Controlling Day/Night
Function
You can control the Day/Night function On (night mode)
and Off (day mode).
To use this function, you need to make Day/Night active
in the Trigger menu of the Administrator menu
(page 62).
1
Display the image on the monitor window.
2
Select Day/Night from the trigger drop-down list.
3
Click .
Each click switches the Day/Night function
alternately between On (night mode) and Off (day
mode).
Note
If Day/Night mode in the Trigger-Day/Night menu
(page 62) is set to Disable or Auto, you cannot control
the Day/Night function by clicking .