Day/Night Tab - Sony IPELA SNC-RX550N User Manual

SNC-RX550P: 1/10000, 1/6000, 1/3500, 1/2500,
1/1750, 1/1250, 1/1000, 1/600, 1/425, 1/300, 1/215,
1/150, 1/120, 1/100, 1/75, 1/50, 1/25, 1/12, 1/6, 1/3,
1/2, 1 (sec.)
Iris
Select the iris from the drop-down list.
Selectable values of the iris are as follows:
Close, F28, F22, F19, F16, F14, F11, F9.6, F8, F6.8,
F5.6, F4.8, F4, F3.4, F2.8, F2.4, F2, F1.6
Gain
Select the gain from the drop-down list.
Selectable values of the gain are as follows:
-3, 0, +2, +4, +6, +8, +10, +12, +14, +16, +18, +20, +22,
+24, +26, +28 (dB)
Brightness
Tweaks the exposure set in the exposure mode. It is
brighter when a larger value is selected, and it is darker
when a smaller value is selected. A value from –5 to +5
can be set.
Saturation
Select the saturation in 7 steps, from –3 to +3.
Selecting +3 provides the image with the highest
saturation.
Sharpness
Select the sharpness in 7 steps, from –3 to +3.
Selecting +3 provides the image with the highest
sharpness.
Contrast
Select the contrast in 7 steps, from –3 to +3.
Selecting +3 provides the image with the highest
contrast.
Note
The saturation and contrast settings are effective for the
images from a computer. They are not effective for the
video output.
User preset
You can save the present settings in the camera as
custom settings, or you can load the settings saved in the
camera.
This function is useful when you temporarily change the
settings for the image or reset them to the previous
settings.
Save: Click to save the present settings of the Picture
tab.
Load: Click to load the saved settings. To use them,
click OK.
38
Setting the Camera Image and Audio — Camera Menu
OK/Cancel
See "Buttons common to every menu" on page 30.

Day/Night Tab

Use this tab to set the day/night function of the camera.
Day/Night mode
Select the day/night mode from among five modes.
Disable: Always works in day mode.
Auto: Normally works in day mode. It switches
automatically to night mode in a dark place.
Manual: Switch the day/night mode manually. When
you select Manual, On and Off become active.
When you select On, the camera works in night
mode. When you select Off, it works in day mode.
Timer: Normally the camera works in day mode. It
switches to night mode at the time that you have you
set in the Schedule menu.
Click Schedule and the setting menu for the effective
period is displayed. ("Setting the Schedule —
Schedule Menu" on page 63)
Sensor: Controls the day/night mode by synchronizing
it with the sensor input. Select the sensor input with
which you want to synchronize the mode: Sensor
input 1 or Sensor input 2.