Setting The Camera Image And Audio - Camera Menu; Common Tab - Sony IPELA SNC-RX550N User Manual

Setting the Camera
Image and Audio
— Camera Menu
When you click Camera in the Administrator menu, the
Camera menu appears.
Use this menu to set the functions of the camera.
The Camera menu consists of five tabs: Common,
Picture, Day/Night, Video codec and Streaming.

Common Tab

Image mode
Selects the mode of the image output from the camera.
Field: Select this option when shooting a moving image.
Frame: Select this option when shooting a still image.
With this setting, the vertical resolution increases but
the edge of a moving object may be jagged.
Auto: The Frame or Field mode process is
automatically performed depending on movement in
the image. Frame is performed for an area without
movement, and Field is performed for an area with
movement.
Color
Select Color or Monochrome for the image.
Zoom mode
Selects the zoom mode.
Full: An image can be zoomed up to 26× optical zoom
and 12× digital zoom, 312× zoom in total.
Optical: An image can be zoomed up to 26× optical
zoom.
36
Setting the Camera Image and Audio — Camera Menu
Focus mode
Selects the focus mode.
Auto: The focus is automatically adjusted.
Manual: The focus can be adjusted by using the Near,
Far and One Push Focus buttons of the control
panel displayed from the main viewer.
Stabilizer
Select the stabilizer to compensate for oscillation. Select
On to activate the stabilizer when the camera is affected
by oscillation.
Notes
• The view angle of the camera is reduced by
approximately 10 % when Stabilizer is set to On.
• The frame rate lowers half when Stabilizer is set to
On.
• The stabilizer may not be effective depending on the
degree of oscillation.
Microphone
Select whether you are going to send the audio from the
m microphone input connector. Select On to send the
audio from this network camera.
Note
When you change the Microphone setting, click
Refresh on the browser to reflect the change when
opening the main viewer page.
Mic volume
Set the volume level of the audio input from the m
microphone input connector. It is adjustable from –10 to
+10.
Audio codec
Select the bit rate when you send the audio from the m
microphone input connector. G.711 (64kbps), G.726
(40kbps), G.726 (32kbps), G.726 (24kbps) or G.726
(16kbps) can be selected.
Notes
• If the bit rate is set to other than G.711(64kbps), no
audio is output when you use the Java applet viewer.
• When MPEG4 is selected for Codec in the Alarm
buffer menu, no audio is output when you use Java
applet viewer.