Installation; Windows - Siemens SIMATIC WinCC V11 System Manual

Installation

Contents
Information that could not be included in the online help.
Operating system message for SIMATIC USB drivers
An operating system message relating to the SIMATIC USB driver is issued on the operating
system Windows Server 2003 R2 StdE SP2.
This message must be acknowledged with "Yes" as soon as possible after the message has
been issued. The message may be in the background and therefore not be immediately
visible. After a certain period of time, the setup continues with the next component. The
SIMATIC USB drivers are then not installed and can not be used.
Installation on a computer with regional setting "Turkish"
If the computer is operated with the regional setting "Turkish" at the time of the installation,
WinCC Runtime Professional cannot be started.
Installation via download
The supplementary installation of the WebNavigator client via download to the WebNavigator
server is not permitted.
Hotfix for SIMATIC NET
Install hotfixes for the following products:
● SIMATIC NET CD V8.0 SP1 for Windows 7: Hotfix 1 for SIMATIC NET CD V8.0 SP1
You can find the hotfixes in the Service & Support area of the Siemens website under the
entry ID 12660737.
SQL Server
During the installation of the SQL Server 2005 or the SQL Server 2005 Express, an error can
occur if the product SQL Server 2008 is already installed on your system.
In order to be able to use both varieties of the SQL Server in parallel. the SQL Server 2005
must be installed before the SQL Server 2008. To do this, follow these steps:
1. Remove the SQL Server 2008 version, without deleting the databases.
2. Install WinCC. The SQL Server 2005 is hereby installed and set up on your system.
3. Install the SQL Server 2008 again. Now you can continue to use the existing databases
in the SQL Server 2008.
WinCC Runtime Professional Readme
System Manual, 04/2011
2
7