Siemens UP 588 Product Information

Touch panel UP 588
Touch panel UP 588/11
Touch panel UP 588/21
Accessories: Design frame, anodised aluminium
Product and Applications Description
The touch panel UP 588 is a multifunctional dis-
play/control unit for the EIB. The basis of the device is an
LC display with a resolution of 320 x 240 pixels and an
integrated, resistive matrix with 6 x 10 fields. The dis-
play has backlighting available, which is activated dur-
ing operation and can be switched off automatically
after an adjustable period.
• Touch-Panel UP 588
backlighting green
• Touch-Panel UP 588/11
backlighting white
• Touch-Panel UP 588/21
backlighting white
In connection with the associated application program,
the display unit can be used for the following functions:
the display and operation of up to 70 EIB standard func-
tions on 7 display pages, the display of an alarm page
with 4 alarm signals and 2 text messages as well as the
execution of time-controlled tasks.
The following accessories are required for the touch
panel:
Design frame, aluminium 5WG1 588-8AB01
Application Programs
01 07 Touch-Panel vision 802103
• display and operation of up to 70 EIB standard
functions on 7 display pages
• display of an alarm page with 4 alarm signals and
2 text messages
• execution of time-controlled tasks
• 8 scene with 10 communication objects are possible
• display of date and time
Siemens AG
Automation and Drives Group
Electrical Installation Technology
P.O.Box 10 09 53, D-93009 Regensburg
5WG1 588-2AB01
AC 230V
5WG1 588-2AB11
AC 230V
5WG1 588-2AB21
AC / DC 24V
UP 588, 6 pages
© Siemens AG 2006
Subject to change without prior notice
Technical Product Information

Installation instructions

• The device can be used for permanent interior instal-
lations in dry rooms and for insertion in flush-type
boxes.
Diagram 1: drilling jig for cavity wall box for Touch
panel UP 588
V
WARNING
• The device may only be installed and commissioned
by an authorised electrician.
• The device may only be used in connection with the
named accessories, in particular the flush-type box.
• 230V devices which are not included with supply may
not be inserted in the flush-type box. It is also not
possible to loop through 230V cables.
• The prevailing safety and accident regulations should
be observed.
• The power supply voltage may only be connected to
the supply if the device has been fully installed.
• Electrical isolation should be ensured between the
bus cable and the 230V power supply.
• For planning and construction of electric installations,
the relevant guidelines, regulations and standards of
the respective country are to be considered.
Update: http://www.siemens.de/gamma
instabus EIB
April 2006
5WG1 588-2AB01
5WG1 588-2AB11
5WG1 588-2AB21
5WG1 588-8AB01
Technical Manual
2.3.1.4/1