Set The Raster Image Resolution Esc - Epson ET-4500 Programming Manual

5.1.21 Set the raster image resolution ESC (D nL nH rL rH v h
ESC (D nL nH rL rH v h
[Name]
[Format]
[Range of Definition]
[Function]
These printers doesn't have printer microweave mode.
1. In case of microweave mode off
1. Case of Driver microweave mode
Case of Driver microweave mode Black Mode
Mode
(H x V)
360x180 4/1440 12/1440 180
Case of Driver microweave mode Color Mode
Mode
(H x V)
360x180 4/1440 12/1440 60
Case of Driver microweave mode Color Mode Black Image Only
Mode
(H x V)
360x180 4/1440 12/1440 60
*1 ) The first nozzle data of each color must be zero
2. Case of printer microweave mode
No support.
[Initial State]
[Related Commands]
Revision: 1
Set the raster image resolution
1BH, 28H, 44H, nL,nH, rL, rH, v,h
nL=04H, nH=00H
0 <= v <= 127
0 <= h <=127
1) Sets the raster image resolution ( ESC i ).
Vertical resolution :
Horizontal resolution :
2) Available resolutions are : 120, 360, 720dpi
3) Following parameters are supported.
ESC ( D ESC i
h / r v / r mH*256+mL n2
ESC ( D ESC i
h / r v / r mH*256+mL n2
ESC ( D ESC i
h / r v / r mH*256+mL n2
-
[Setting] Commands whose settings are affected by this command.
The Resolution set of Raster image exerts the influence on the processing by the ESC i
command .
[Setting] Commands that change the effects of this command.
The Resolution setting of Raster image is returned to the initial states by the ESC @ and
the ESC (G commands.
[Operation] Commands whose functionality is affected by this command.
None
[Operation] Commands that change the effects of this command.
None
( rH*256 + rL ) / v dpi
( rH*256 + rL ) / h dpi
ESC(e Used Nozzle number
11h/12h/13h 180Nozzles
ESC(e Used Nozzle number
11h/12h/13h 60Nozzles
ESC(e Used Nozzle number
11h/12h/13h 60Nozzles
Ver 1.00
*1)
*1)
2016/09/02
Page: 44