Phonologue Chassis (Standard); Phonologue Mm Board (Optional) - PrimaLuna EvoLution Series Manual

PhonoLogue Chassis (standard)
Every EVO Integrated Amplifier and Preamplifier comes standard with an extra chassis mounted on the
bottom plate. This extra chassis is meant for installation of our MM PhonoLogue board. It provides extra
space, which is in most PrimaLuna EVO models not available anymore and it provides an extra shielded
environment for less hum and noise mounting of the sensitive phono stage.
PhonoLogue MM Board (optional)
Our PhonoLogue phono stage can be installed at any time by your dealer or any qualified person. Ask
for the PhonoLogue installation bulletin.
The PhonoLogue MM phono stage with RIAA equalization takes the place of the AUX2 input. It provides
superior sound quality on a tiny footprint. We use Surface Mount Technology implementation for shortest
signal paths as well as minimum parasitic capacitances and inductances. Excellent parts throughout,
selected on sound quality as first priority: miniature film capacitors, minimelf resistors, superior opamp
for highest accuracy, lowest noise, highest speed and most robust drive capabilities into the RIAA
correction stage, resulting in a very detailed, open and lifelike sound from any LP record. Low
impedance electrolytics, super low-­noise power supply. Dimensions: small as a big stamp!
EvoLution Series
Specifications:
Frequency Response: 10Hz -­ 50kHz
Input Impedance: 50 kOhm
Gain: 42dB (127x)
RIAA accuracy: <0,5B 20Hz -­ 20kHz
Overload Margin: >20dB rel 5mV
Harmonic Distortion & noise: -­83dB
Size: 3.2 x 3.8 cm (1.26" x 1.5")
11