Back Panel Inputs, Outputs - PrimaLuna EvoLution Series Manual

Back Panel Inputs, Outputs
At the rear panel, you will find your inputs, eventually the HT Pass Thru, the speaker terminals, Tape Out
and Sub Out. Attach the (+) from your loudspeaker to the 4 or 8 Ohm terminal that most closely matches
the average impedance of your loudspeakers according to their manufacturer's specifications. The (-­)
from your loudspeaker attaches to the 0 Ohm terminal. Experiment using the 4 or 8 Ohm (+) terminal to
find what's the best match with your speakers. Don't make any assumptions. Trust your ears.
EvoLution Series
6B