Table of Contents
Advertisement
Available languages
Available languages
Figure 5 Delete a sensor
1 Select sensor
2 Go back without changes
RTC input and output variables values
All input and output signals are connected to the sc1000 controller or directly to the RTC module.
Refer to the RTC module and the sc1000 documentation.
Refer to
Table 2
and
Table 3
Refer to
Table
4,
Table
Refer to
Table 8
and
Table 9
values.
Refer to
Table 10
and
Refer to
Table 12
for the RTC111 SRT-module measurement values.
Tag name
Parameter Unit
RTC input
PO
RTC input
Flow rate
MEASUREMENT 1
Q 1
ACTUAT VAR 2
Pdos 1
ACTUAT VAR 3
Digi 1
ACTUAT VAR 4
Preg 1
ACTUAT VAR 5
ß' 1
ACTUAT VAR 6
Qras 1
Tag name
Parameter Unit
RTC input
PO
RTC input
PO
RTC input
Flow rate
RTC input
Flow rate
for the RTC101 P-module measurement values.
5,
Table 6
and
Table 7
for the RTC113 ST-module and RTC112 SD-module measurement
Table 11
for the RTC103 N-module measurement values.
Table 2 RTC101 P-module (1-channel)
Channel Description
-P
mg/L 1
4
L/s
1
L/s
1
L/h
1
—
1
L/h
1
—
1
L/s
1
Table 3 RTC101 P-module (2-channels)
Channel Description
-P
mg/L 1
4
-P
mg/L 2
4
L/s
1
L/s
2
3 Delete the sensor
for the RTC105 N/DN-module measurement values.
Phosphate
Supply volume flow
Wastewater flow rate
Set point precipitant dosing volume
Digital output for pulsed pump operation (ON/OFF)
Internal calculation variable for precipitant volume
Only with open loop: ß' otherwise internal calculation
variable.
Return sludge volume
Phosphate 1
Phosphate 2
Supply volume flow 1
Supply volume flow 2
English 9
Advertisement
Table of Contents
