Anti Blink - Sony DSC-TX9 Cyber-shot&reg Handbook

Anti Blink

When Scene Selection is set to
image, the camera automatically shoots two images consecutively. The camera will select,
display and record the image which the eyes are not blinked automatically.
1 Lower the lens cover to switch to shooting mode.
2
(REC Mode) t
(Soft Skin) or
3
t (Anti Blink) t desired mode
(Auto)
(Off)
Notes
• Anti Blink does not function in the following situations.
– When using the flash
– During burst shooting
– When the Face Detection function does not work
– When the Smile Shutter function is activated
• Sometimes Anti Blink function does not work depending on the situation.
• When the Anti Blink function is set to [Auto] but only images with the subject's eyes closed are
recorded, the message "Blinked eye detected" is displayed on the LCD screen. Shoot again as necessary.
(Soft Skin) or
(Scene Selection) t
(Soft Snap)
When Face Detection is active, the Anti Blink function operates so
that images with the subject's eyes open are recorded.
Does not use the Anti Blink function.
(Soft Snap) while you are shooting an
85 GB