Anti Blink - Sony Cyber-shot DSC-TX200 User Manual

Cyber-shot User Guide
Before Use
Shooting
Viewing
Using MENU items (Shooting)
Using MENU items (Viewing)
Changing settings
Viewing images on a TV
Using with your computer
Printing
Troubleshooting
Precautions/About this camera
Contents list
Top page > Using MENU items (Shooting) > MENU items (Shooting) > Anti Blink

Anti Blink

When Scene Selection is set to [Soft Skin] or [Soft Snap] and the subject blinks while you are shooting
an image, the camera automatically shoots two images consecutively. The camera will automatically
select, display and record the image in which the eyes are not blinked.
1. MENU
(Anti Blink)
When Face Detection is active, the Anti Blink function operates so that images with the
subject's eyes open are recorded.
(Auto)
Does not use the Anti Blink function.
(Off)
Notes
Anti Blink does not work in the following situations:
When using the flash
During burst shooting
When the Face Detection function does not work
When the Smile Shutter function is activated
Sometimes the Anti Blink function does not work depending on the situation.
When the Anti Blink function is set to [Auto] but only images with the subject's eyes closed are
recorded, the message "Blinked eye detected" is displayed on the screen. Shoot again as
necessary.
Related Topic
Scene Selection
MENU items not available in some REC modes
Copyright 2012 Sony Corporation
135
desired mode
Search Print
Back to top