Alarm - Caimore CM550-5 Series User Manual

Corresponding voltage/current of low range=5V, true value of low range=-5℃
 Acquisition update time: Acquisition Update Time: Collect the input frequency and
update it. (This parameter is invalid in current version)
 Working mode: there are 4 types: query, query + alarm, query + report and query +
alarm + report.
 Alarm triggering condition: there are 4 types: upper limit exceeding alarm, lower
limit exceeding alarm, alarm between upper limit and lower limit, alarm except upper
limit and lower limit.
 Upper limit of alarm: the upper limit value of alarm, or the maximum value of
limitation.
 Lower limit of alarm: the lower limit value of alarm, or the maximum value of
limitation.
 Number of alarm: when alarm generates, the phone number that alarm is sent to.
 Alarm content: when alarm generates, the alarm content that alarm is sent to. Chinese
or English is supported.
 Configuration method: Click Edit on the right side, and all parameters of this server
will be showed below, clicking the corresponding edit box to edit them. After finishing
the edit, please click to save them. Please save the parameters after finishing them, and
they will take effect after rebooting the device.

2.4.7 Alarm

 Alarm configuration
 Alarm Mode: There are three modes can be chosen: Only Network/Only SMS/ SMS
when network is not available.
 Alarm interval: it means the time interval between two alarms and it is related to the
following parameters. If the alarm number is set 1, the interval is invalid. When it is
厦 门 才 茂 通 信 科 技 有 限 公 司
Xiamen Caimore Communication Technology Co.,Ltd
31