Caimore CM550-5 Series User Manual page 28

 Configuration method: Click Edit on the right side, and all parameters of this server
will be showed below, clicking the corresponding edit box to edit them. After finishing
the edit, please click to save them. Please save the parameters after finishing them, and
they will take effect after rebooting the device.
 Basic Parameters Configure
 Reconnect interval time: it means the time interval of two-time reconnections when
RTU disconnects any center servers or center server connects unsuccessfully or linkage
interrupt. The default is suggested.
 Configuration method: Click the corresponding right edit box, inputting the figure or
the option that is to be set. After finishing the edit, click to save them. Click to save
after setting the server parameters, which will take effect after rebooting the device.
 RTU Identify
 RTU ID: the identification of device, limiting 8 byte and 16 decimal, for example:
00000001, 0000000A. The figure of multiple RTU that connect the same server cannot
be the same; it must be the only one. After RTU connects with server, server will get
this identification for the convenience of managing multiple devices.
 MODBUS ID : RTU recognizes different slave units from the ID of device.
 SIM/UIM number: phone number of SIM/UIM card.
 Configuration method: Click the corresponding right edit box, inputting the figure or
the option that is to be set. After finishing the edit, click to save them. Click to save
after setting the server parameters, which will take effect after rebooting the device.
厦 门 才 茂 通 信 科 技 有 限 公 司
Xiamen Caimore Communication Technology Co.,Ltd
25