Digital Output - Caimore CM550-5 Series User Manual

falling edge and both edges.
 Alarm or not: Enable or Disable the Alarm when it exceeds the limit.
 Limit alarm threshold: An alarm signal will be generated when the calculated value
exceeds the threshold.
 Enable: To operate the data center and collect data from the port, the counter should be
enabled.
 Mobile phone number for alarm: The alarm information will be sent to the mobile
phone by SMS message.
 Alarm contents: The alarm contents will be sent to the phone when there is an
triggered alarm.
 Configuration Method: Click the corresponding Edit box directly, then enter the value
or select the item to set, when editing is complete, please click to save. Click to save
after finishing the setting of server parameters, it will take effect after reboot.

2.4.5 Digital Output

 Cycle of square wave: it needs to set the cycle of square wave if the square wave is
generated.
 Enable: interface data can be operated or acquired after enabling data center.
 Configuration method: Click Edit on the right side, and all parameters of this server
will be showed below, clicking the corresponding edit box to edit them. After finishing
the edit, please click to save them. Please save the parameters after finishing them, and
they will take effect after rebooting the device.
厦 门 才 茂 通 信 科 技 有 限 公 司
Xiamen Caimore Communication Technology Co.,Ltd
29