Digital Input/Count - Caimore CM550-5 Series User Manual

 Relay Output
 MODBUS level logic: set the corresponding state of relay for high/low level. (RTU
platform protocol doesn't support this parameter, which is exclusively used in
MODBUS protocol). The default output level when start: set the initialized state after
relay is power on. (RTU platform protocol doesn't support this parameter, which is
exclusively used in MODBUS protocol)
 Enable: It can operate or collect interface data after enabling data center.
 Configuration method: Click the corresponding right edit box, inputting the figure or
the option that is to be set. After finishing the edit, click to save them. Click to save
after setting the server parameters, which will take effect after rebooting the device.

2.4.4 Digital Input/Count

 8 IO mode selection
 Mode selection of digital counter: there are 6 channels of 8 channel IO input are
reused with counter, and that is 3~8 channel. You can choose counter functions or IO
output functions. (The input range is: 0-3.3V is low level and 5-30V is high level)
 Configuration method: Click the corresponding right edit box, inputting the figure or
the option that is to be set. After finishing the edit, click to save them. Click to save
after setting the server parameters, which will take effect after rebooting the device.
厦 门 才 茂 通 信 科 技 有 限 公 司
Xiamen Caimore Communication Technology Co.,Ltd
27