Rtu; Server - Caimore CM550-5 Series User Manual

tunnel state, router will send LCP packet to server in every tunnel check interval. When
the number of tunnel-checking failures over the value of "Tunnel Check Times", router
will initiate to terminate the connection and send a request to rebuild the tunnel.
 Other Parameters: It's used in a situation where a special parameter is required to
negotiate when establishing a tunnel. In general, this parameter can be left in blank,
unless server is requiring a special negotiation parameter.
Format -- "novj;novjcomp", between each parameter should be separated by ";".

2.4 RTU

2.4.1 Server

 Server Parameters Configure
 Server IP address: Server IP that wants to connect, and fill the IP address according to
the format as picture. Server's domain name is acceptable.
 Port : the server port that users want to connect (0-65535), and the suggested value is
more than 1024.
 Networking protocol: TCP/UDP connection protocol, and different centers can chose
different protocol to connect.
 Data center protocol: The upper layer protocol between RTU and server center
communication, currently support RTU management platform protocol and MODBUS
protocol with the way of TCP.
 Local port: Bind the port number of clients, and 0 shows it is allocated randomly by
program.
 Enable: Please choose YES after configuring the parameters, and then the server
parameter will take effect.
厦 门 才 茂 通 信 科 技 有 限 公 司
Xiamen Caimore Communication Technology Co.,Ltd
24