Route - Caimore CM550-5 Series User Manual

2.2.3 Route

Setup system static router setting and display system router information. System default
router is to send all data to public internet, if user wants to visit appointed network, please
add router by hand.
 Destination IP: The destination IP address of static route, it can be a host or network
segment.
 Mask: Subnet mask of destination IP. If destination is a host, please set mask to
"255.255.255.255".
 Gateway: Next-hop IP of static route. If there is no need to add a gateway, please set it
to "0.0.0.0".
 Metric: Routing metric. The default value is 0.
 MTU: The maximum transmission unit. The default value is 1500.
 Interface: System interface.
 Notice: After adding a static route, if the rule doesn't appear in the routing table
below, it means this rule has not been added successfully even if there is a
successful tip. If that happens, please check your settings.
厦 门 才 茂 通 信 科 技 有 限 公 司
Xiamen Caimore Communication Technology Co.,Ltd
18