Operation; Configuration Using The Lcd With Keypad; Conventional Lcd (L1 Option); Lcd Menu Structure - ABB JDF200 Operating Instruction

8 7 Operation

8.1 7.1 Configuration of the field indicator using the
optional integral LCD with keypad (menu-controlled)
The integral LCD is connected on the field indicator electronic
board. It can be used to visualize the process measured
variables as well as to configure the display.
In addition, diagnostic information is provided. To access the
functionality of the LCD an activation procedure needs to be
carried out. The keypad activation procedure is the same for
the TTG (Trough The Glass) version and the conventional LCD.
Figure 8: Display keypad
The keys (1) , (4) , (2)
menu-controlled configuration.
— The menu / submenu name is displayed above in the LCD
display.
— The number/line of the currently selected menu item is
displayed in the upper right of the LCD display.
— A scroll bar is located on the right edge of the LCD
display which shows the relative position of the currently
selected menu item within the menu.
— Both of the keys (1)
functions.
The meaning of these buttons is displayed below in the
LCD display above the respective button.
— You can browse through the menu or select a number
within a parameter value using both keys (2)
and (3) . The button (4)
item.
and (3) are available for the
and (4) can have various
selects the desired menu
Button (1) functionalities
Exit
Back
Cancel
Next
Button (4) functionalities
Select
Edit
Ok

8.2 7.2 Conventional LCD (L1 option)

Gain access to the display by unscrewing the windowed cover.
Please observe the Hazardous area prescription before
proceeding with the cover removal. For activation, see
instructions below.

8.3 7.3 LCD menu structure

The LCD menu is divided in the following sections which can
be selected by acting on the keys (2)
the display the desired sub-menu icon will be visualized,
confirm your selection with the [SELECT] key (4)
Follow the instruction on the screen to perform the
configuration of the different parameters.
7 Operation
Meaning
Exit menu
Back one submenu
Exit without saving the selected parameter
value
Select next position for entering numerical val-
ues or letters
Meaning
Select submenu/parameter
Edit parameter
Save selected parameter and display stored
parameter value
and (3) , once on
.
2600T Series | OI/JDF200-EN Rev. E 13