Wideye iFleetONE User Manual page 78

iFleetONE™ Terminal User Manual
For the terminal to assign dynamic IP addresses to devices connected to
the terminal, the DHCP has to be enabled as follow:
MAC Filtering
To disable or enable MAC Filtering with its settings.
Click MAC Filtering to view the MAC Filtering settings.
Set the MAC Filtering configurations.
Reject List
All PCs/Laptops will be allowed to access the terminal except for those
(MAC addresses) listed in the Reject List.
i. Click Enabled.
ii. Set the range of the IP addresses in DHCP IP Pool Start and
DHCP IP Pool End.
iii. Set the IP Lease Time in seconds.
iv. Click Update to take effect.
WARNING: IP subnet of
devices as it is reserved for internal use in the terminal.
102.168.1.36 is not allowed to be used in connected
Page 78 of 100